Skip to content
▪ JetLabel 1.2.0 · Mac, iPhone and iPad · 7-day free trial · Pro: one-time in-app purchase
JetLabel™
Features Barcodes Printers Pricing FAQ Highlights in JetLabel 1.2.0 Try free for 7 days

cab MACH series on Mac — Setup & Label Printing with JetLabel

Limited on Mac

The cab MACH series is a 203 / 300 / 600 dpi label printer from cab with its own proprietary printer language. On Mac, JetLabel prints through the macOS printing system, so the printer needs a working macOS driver. Driver support for the cab MACH series on macOS is limited; check it before you buy. Printing from iPhone and iPad is not supported for the cab MACH series.

Try JetLabel free for 7 days
cab MACH series — spec sheet
Protocol
proprietary
Resolution
203 / 300 / 600 dpi
Interfaces
USB, Eth, Serial, opt. WLAN
macOS driver
Limited
iPhone & iPad
Not supported
Recommended
60 × 30 mm, 100 × 150 mm

Printing from iPhone and iPad

JetLabel on iOS and iPadOS supports AirPrint and suitably configured network label printers using supported protocols. Check the printer and its network configuration before printing.

Each model page shows whether the printer works on Mac with its macOS driver and whether direct network printing from iPhone and iPad is possible. The ratings are based on manufacturer specifications. Brother QL and Bluetooth direct printing are not supported on iOS.

Does the cab MACH series work on macOS?

Possibly. JetLabel prints through the macOS printing system, so it depends on a working macOS driver, and driver support for the cab MACH series is limited. This assessment is based on the manufacturer’s specifications, not on a test by JetLabel. Try it with your printer during the 7-day trial.

And on iPhone and iPad?

Printing from iPhone and iPad is not supported for the cab MACH series.

Setup

Set it up on your Mac.

  1. 01 Download and install the macOS driver for the cab MACH series from cab.
  2. 02 Connect the printer to your Mac and add it in System Settings → Printers & Scanners.
  3. 03 Load the labels and calibrate the media on the printer.
  4. 04 In JetLabel, set the label size to match the loaded labels.
  5. 05 Choose the cab MACH series as the printer in JetLabel and print a test label.
FAQ

About the cab MACH series

No. JetLabel prints on Mac through the macOS printing system, so the cab MACH series needs a working macOS driver.

Printing from iPhone and iPad is not supported for the cab MACH series.

Print to your cab MACH series today.

Try JetLabel free for 7 days

cab is a trademark of its respective owner. JetLabel is independent and not affiliated with cab. Compatibility information is based on manufacturer specifications and has not been individually verified.